بهینه‌سازی پارامترهای مؤثر در فرآیند شکل‌دهی آزاد ورق آهنی با روش انفجار زیرآب

[1] Mostofi TM, Babaei H, Alitavoli M. Theoretical analysis on the effect of uniform and localized impulsive loading on the dynamic plastic behaviour of fully clamped thin quadrangular plates. Thin-Walled Structures. 2016;109:367-76.##

[2] Mostofi TM, Golbaf A, Mahmoudi A, Alitavoli M, Babaei H. Closed-form analytical analysis on the effect of coupled membrane and bending strains on the dynamic plastic behaviour of fully clamped thin quadrangular plates due to uniform and localized impulsive loading. Thin-Walled Structures. 2018;123:48-56.##

[3] Iyama H, Raghukandan K, Nagano S, Itoh S. The Effect of Pressure Vessel in Explosive Forming. InASME Pressure Vessels and Piping Conference 2003 (Vol. 41510, pp. 307-312).##

[4] Hadavi V, Zamani J, Hosseini R. The empirical survey on the effect of using media in explosive forming of tubular shells. World Academy of Science, Engineering and Technology. 2009;60:574-9.##

[5] Alipour R, Najarian F. Modeling and investigation of elongation in free explosive forming of aluminum alloy plate. World Academy of Science, Engineering and Technology. 2011;76:490-3.##

[6] Iyama H, Higa Y, Itoh S. Study on the Effects of Shock Wave Propagation on Explosive Forming. InMaterials Science Forum 2014 (Vol. 767, pp. 132-137). Trans Tech Publications Ltd.##

[7] Zamani J, Goudarzi M. Experimental and numerical investigation of the maximum deflection of circular aluminum plate subjected to free air explosion. Modares Mechanical Engineering. 2015;15(1):219-26.##

[8] Ruan L, Ezaki S, Masahiro F, Shen S, Kawamura Y. Forming of magnesium alloy by underwater shock wave. Journal of Magnesium and Alloys. 2016;4(1):27-9.##

[9] De Vuyst T, Kong K, Djordjevic N, Vignjevic R, Campbell JC, Hughes K. Numerical modelling of the effect of using multi-explosives on the explosive forming of steel cones. InJournal of Physics: Conference Series 2016 (Vol. 734, No. 3, p. 032074). IOP Publishing.##

[10] Iyama H, Itoh S. Study on Explosive Forming of Aluminum Alloy. The International Journal of Multiphysics. 2010;4(4):341-50.##

[11] Iyama H, Higa Y, Nishi M, Itoh S. Numerical simulation of explosive forming using detonating fuse. The International Journal of Multiphysics. 2017;11(3):233-44.##

[12] Nishi M, Sakaguchi H, Tanaka S, Iyama H, Fujita M. Research on explosive forming of magnesium alloy plate using numerical simulation and experimental studies (I). Sci Technol Energ Mater. 2018;79:156-9.##

[13] Iyama H, Higa Y, Nishi M, Itoh S. Magnesium alloy forming using underwater shock wave by wire electric discharge. Int. J. Multiphys. 2019;13:269-82.##

[14] Praba RS, Ramajeyathilagam K. Numerical investigations on the large deformation behaviour of ring stiffened cylindrical shell subjected to underwater explosion. Applied Ocean Research. 2020;101:102262.##

[15] Henchie TF, Yuen SC, Nurick GN, Ranwaha N, Balden VH. The response of circular plates to repeated uniform blast loads: An experimental and numerical study. International Journal of Impact Engineering. 2014;74:36-45.##

[16] Truong DD, Jung HJ, Shin HK, Cho SR. Response of low-temperature steel beams subjected to single and repeated lateral impacts. International Journal of Naval Architecture and Ocean Engineering. 2018;10(6):670-82.##

[17] Zhu L, Shi S, Jones N. Dynamic response of stiffened plates under repeated impacts. International Journal of Impact Engineering. 2018;117:113-22.##

[18] Koli S, Chellapandi P, Rao LB, Sawant A. Study on JWL equation of state for the numerical simulation of near-field and far-field effects in underwater explosion scenario. Engineering Science and Technology, an International Journal. 2020;23(4):758-68.##

[19] Zhang S, Wang G, Wang C, Pang B, Du C. Numerical simulation of failure modes of concrete gravity dams subjected to underwater explosion. Engineering Failure Analysis. 2014;36:49-64.##

[20] Koli S, Chellapandi P, Rao LB, Sawant A. Study on JWL equation of state for the numerical simulation of near-field and far-field effects in underwater explosion scenario. Engineering Science and Technology, an International Journal. 2020;23(4):758-68.##

[21] Iyama H, Higa Y, Nishi M, Itoh S. Magnesium alloy forming using underwater shock wave by wire electric discharge. Int. J. Multiphys. 2019;13:269-82.##

[22] Rezasefat M, Mostofi TM, Ozbakkaloglu T. Repeated localized impulsive loading on monolithic and multi-layered metallic plates. Thin-Walled Structures. 2019;144:106332.##

[23] Rezasefat M, Mirzababaie Mostofi T, Babaei H, Ziya-Shamami M, Alitavoli M. Dynamic plastic response of double-layered circular metallic plates due to localized impulsive loading. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2019;233(7):1449-71.##

[24] Johnson GR. A constitutive model and data for materials subjected to large strains, high strain rates, and high temperatures. Proc. 7th Inf. Sympo. Ballistics. 1983:541-7.##

[25] Myers RH, Montgomery DC, Anderson-Cook CM. Response surface methodology: process and product optimization using designed experiments. John Wiley & Sons; 2016.##

[26] Nasiri S, Sadegh-Yazdi M, Mousavi SM, Ziya-Shamami M, Mostofi TM. Repeated underwater explosive forming: Experimental investigation and numerical modeling based on coupled Eulerian–Lagrangian approach. Thin-Walled Structures. 2022;172:108860.##