- [1] Bi, and H. Hao, “Numerical simulation of pounding damage to bridge structures under spatially varying ground motions,” Engineering Structures, vol. 46, pp. 62-76, 2013.##
- [2] H. Hao, Y. Hao, J. Li and W. Chen, “Review of the current practices in blast-resistant analysis and design of concrete structures,” Advances in Structural Engineering, vol. 19, no. 8, pp. 1193-1223, 2016.##
- [3] Asprone, F. Jalayer, A. Prota and G. Manfredi, “Probabilistic Assessment of Blast-Induced Progressive Collapse in A Seismic Retrofitted RC Structure,” In 14th World Conf. on Earthquake Engineering, Beijing, China 2008.##
- [4] Y. Low and H. Hao, “Reliability analysis of direct shear and flexural failure modes of RC slabs under explosive loading,” Engineering Structures, vol. 24, no.2, pp. 189-198, 2002.##
- [5] Castedo, P. Segarra, A. Alanon, L. M. Lopez, A. P. Santos, and J. A. Sanchidrian, “Air blast resistance of full-scale slabs with different compositions: Numerical modeling and field validation,” International Journal of Impact Engineering, vol. 86, pp. 145-156, 2015.##
- [6] MahdaviSefat and M. Vatani, “Behaviuor of Prestressed Concrete Bridge Under Blast Loading,” Passive Defense, vol.7, no.1, pp. 1-10, 2016. (In Persian)##
- [7] Hao, M. Stewart, Z. Xian Li and Y. Shi, “RC Column Failure Probabilities to Blast Loads,” International Journal of Protective Structures, vol. 1, pp. 571-591, 2010.##
- [8] Wang, D. Zhang, F. Lu, S. Wang, and F. Tang. “Experimental study and numerical simulation of the damage mode of a square reinforced concrete slab under close-in explosion,” Engineering Failure Analysis, vol. 27, pp. 41-51, 2013.##
- [9] Yao, D. Zhang, X. Chen, F. Lu, and W. Wang, “Experimental and numerical study on the dynamic response of RC slabs under blast loading,” Engineering Failure Analysis, vol. 66, pp. 120-129, 2016.##
- Thiagarajan, A.V. Kadambi, S. Robert, and C.F. Johnson, “Experimental and finite element analysis of doubly reinforced concrete slabs subjected to blast loads,” International Journal of Impact Engineering, vol. 75, pp. 162-173, 2015.##
- Li, CH. Wu, and H. Hao, “Investigation of ultra-high performance concrete slab and normal strength concrete slab under contact explosion,” Engineering Structures, vol. 102, pp. 395-408, 2015.##
- Mao, S. J. Barnett, A. Tyas, J. Warren, G. K. Schleyer and S. S. Zaini, “Response of small scale ultra high-performance fibre reinforced concrete slabs to blast loading,” Construction and Building Materials, vol. 53, pp. 822-830, 2015.##
- Tabatabaei and S. Jeffery, “Experimental and numerical analyses of long carbon fiber reinforced concrete panels exposed to blast loading,” International Journal of Impact Engineering, vol. 57, pp. 70-80, 2013.##
- K. Hurst, “Prestressed concrete design,” 2nd Edition CRC Press, 2019.##
- K. Kong and R.H. Evans, “Reinforced and prestressed concrete,” 3rd edition, CRC Press, 2017.##
- W. Hyde, “User’s Guide for Microcomputer Programs CONWEP and FUNPRO Applications of TM5-855-1: Fundamentals of Protective Design for Conventional Weapons,” U.S. Army Engineers, 1988.##
- N. Kingery and G. Bulmash, “Airblast Parameters from TNT Spherical Air Burst and Hemispherical Surface Burst,” Report ARBL-TR-02555, U.S. Army BRL, Aberdeen Proving Ground, MD, 1984.##
- ABAQUS User Manual, 2019.##
- Telford, MC90 FIP-CEB Model Code,1990.##
- K. Zanganeh, “Shear Strength of Reinforced Concrete Beams Subjected to Blast Loading,” KTH Architecture and Building, M.Sc. Thesis, Stockholm Sweden, 2012.##
- Ngo, P. Mendis and T. Krauthammer, “Behavior of ultrahigh-strength prestressed concrete panels subjected to blast loading,” Journal of Structural Engineering, Vol. 133, no. 11, pp. 1582-1590, 2007.##
|
