طراحی، شبیه‌سازی و ساخت شیفت دهنده فاز فریتی موج بری در باند فرکانسی X

[1] M. Decréton, E. Loute, A. S. Vander Vorst, and F. Gardiol, “Computer Optimization of E-Plane Resonance Isolators,” IEEE Transactions on Microwave Theory and Techniques, vol. 19, pp. 322-331, 1971.  ##

[2]F. E. Gardiol and A. S. Vander Vorst, “Computer analysis of E-Plane resonance isolators,” IEEE Transactions on Microwave Theory and Techniques, vol. 19, pp. 315-322, 1971.  ##

[3] F. S. Chen, “Ferrite resonance isolators using tapered DC magnetic field,” IRE Trans. Microwave Theory and Techniques, vol. 10, pp. 579-584, 1962. ##

[4] K. J. Button, “Theoretical analysis of the operation of the field-displacement ferrite isolator,” RE Trans. Microwave Theory and Techniques, vol. 6, pp. 303-308, 1958.   ##

[5] S. Weisbaum and H. Boyet, “Field displacement isolators at 4, 6, 11 and 24 kmc,” IRE Trans. on Microwave Theory and Techniques, vol. 5, pp. 194-198, 1957.  ##

[6] C. Fay and R. Comstock, “Operation of the field displacement isolator in rectangular waveguide,” IRE Trans. on Microwave Theory and Techniques, vol. 8, pp. 605-611, 1960.    ##  

[7] C. Fay and R. Comstock, “Operation of the ferrite junction circulator,” IRE Trans. on Microwave Theory and Techniques, vol. 13, pp. 15-27, 1965.    ##

[8] C. Fournet-Fayas, A. C. Priou, and G. E. Forterre, “A 50-kw CW ferrite circulator in S band,” IEEE Transactions on Microwave Theory and Techniques, vol. 26, pp. 360-363, 1978.   ##

[9] E. Schloemann and R. E. Blight, “Broad-band stripline circulators based on YIG and Li-ferrite single crystals,” IEEE Transactions on Microwave Theory and Techniques, vol. 34, pp. 1394-1400, 1986. ##

[10] Jr. J. B. Castillo and L. E. Davis, “Computer-aided design of three-port waveguide junction circulators,” IEEE Transactions on Microwave Theory and Techniques, vol. 18, pp. 25-34, 1970.   ##

[11]H. Bosma, “On stripline Y-circulation at UHF,” IEEE Transactions on Microwave Theory and Techniques, vol. 12, pp. 61-72, 1964. ##

[12]R. A. Stern and J. P. Agrios, “A 500 kW X-band air-cooled ferrite latching switch,” IEEE Transactions on Microwave Theory and Techniques, vol. 16, pp. 1034-1037, 1968.   ##

[13]K. H. Hering, “A Novel Design of an X-Band High-Power Ferrite Phase Shifter (Short Papers),” IEEE Transactions on Microwave Theory and Techniques, vol. 20, pp. 284-286, 1972.##

[14]J. R. Bray and L. Roy, “Development of a millimeter-wave ferrite-filled antisymmetrically biased rectangular waveguide phase shifter embedded in low-temperature cofired ceramic,” IEEE Transactions on Microwave Theory and Techniques, vol. 52, pp. 1732-1739, 2004. ##

[15]K. C. Hwang and H. J. Eom, “Tunable notch filter of ferrite-filled grooves in parallel plates,” IEEE microwave and wireless components letters, vol. 15, pp. 363-365, 2005.   ##

[16]A. Clavin, “Reciprocal Ferrite Phase Shifters in Rectangular Waveguide (Correspondence),” IRE Trans. on Microwave Theory and Techniques, vol. 6, pp. 334-334, 1958.         ##

[17]W. J. Ince and E. Stern, “Nonreciprocal remanence phase shifters in rectangular waveguide,” IEEE Transactions on Microwave Theory and Techniques, vol. 15, pp. 87-95, 1967.  ##

[18]C. L. Hogan, “The ferromagnetic Faraday effect at microwave frequencies and its applications,” Bell System technical journal, vol. 31, pp. 1-31, 1952.  ##

[19]A. Clavin, “High-Power Ferrite Load Isolators,” IRE Trans. on Microwave Theory and Techniques, vol. 3, pp. 38-43, 1955.   ##

[20] D. M. Pozar, “Microwave engineering,” John Wiley & Sons, 2009.##

[21]E. Schlomann, “On the theory of the ferrite resonance isolator,” IRE Trans. on Microwave Theory and Techniques, vol. 8, pp. 199-206, 1960.  ##