عملکرد پل های بتنی پیش تنیده تحت بار انفجاری

1. T. Rabczuk and J. Eibl, “Modelling dynamic failure of concrete with meshfree methods,” Int. J. Impact Eng., 32:1878e97, 2006.##

2.  K. Xu and Y. Lu, “Numerical simulation study of spallation in reinforced concrete plates subjected to blast loading,” Comput. Struct., 84:431e8, 2006.##

3.  E. B. Williamson and D. G. Winget, “Risk Management and Design of Critical Bridges for Terrorist Attacks,” Journal of Bridge Engineering, vol. 10, no. 1, pp. 96-106, 2005.##

4.  D. G. Winget, K. A. Marchand, and E. B. Williamson, “Analysis and Design of Critical Bridges Subjected to Blast Loads,” Journal of Structural Engineering, vol. 131, no. 8, pp.      1243-1255, 2005.##

5.  J. Magnusson and M. Hallgren, “Reinforced High Strength Concrete Beams Subjected to Air Blast Loading,” Structures Under Shock and Impact VIII, edited by N. Jones and C. A. Brebbia,     Computational Mechanics Inc., Billerica, Ma., pp. 53-62, 2004.##

6. J .Li and H. Hao, “Influence of brittle shear damage on accuracy of the two-step method in prediction of structural response to blast loads,” Int. J. Impact Eng., 54:217e31, 2013.##

7. J. Li and H. Hao, “Numerical study of structural progressive collapse using substructure technique,” Eng. Struct., 52:101e13, 2013.##

8. K. Bi and H. Hao, “Numerical simulation of pounding damage to bridge structures under    spatially varying ground motions,” Eng. Struct., 46:62e76, 2013.##

9. C. F. Zhao and J. Y. Chen, “Damage mechanism and mode of square reinforced concrete slab     subjected to blast loading,” Theor. Appl. Fract. Mech., 63e 64:54e62, 2013.##

10. J. Baylot, J. Roy, and J. Hall, “Prediction Method for Response of Steel Bridge Beams and Girders to Blast and Fragment Load,” Transportation       Research Record, 2002.##

11.  ABAQUS, “User’s Manual,” Version 6.12, 2013.##

12.  ABAQUS, “Theory Manual,” 2013.##

13. J. Lubliner, J. Oliver and E. Onate, “A Plastic Damage Model for Concrete,” Internat. J. Solids Structures, vol. 25, pp. 299-329, 1989.##

14. M. B. Lu, “Application of Displacement-Based Design Method to Blast-Resistant Reinforced  Concrete Structures,” Ph. D. Thesis, University of Missouri-Rolla, Rolla, MO, 2005.##